Conceptual design study of a Harrier V/STOL research aircraft

MCAIR recently completed a conceptual design study to define modification approaches to, and derive planning prices for the conversion of a two place Harrier to a V/STOL control, display and guidance research aircraft. Control concepts such as rate damping, attitude stabilization, velocity command, and cockpit controllers are to be demonstrated. Display formats will also be investigated, and landing, navigation and guidance systems flight tested. The rear cockpit is modified such that it can be quickly adapted to faithfully simulate the controls, displays and handling qualities of a Type A or Type B V/STOL. The safety pilot always has take command capability. The modifications studied fall into two categories: basic modifications and optional modifications. Technical descriptions of the basic modifications and of the optional modifications are presented. The modification plan and schedule as well as the test plan and schedule are presented. The failure mode and effects analysis, aircraft performance, aircraft weight, and aircraft support are discussed

Determining F-factor using ground-based Doppler radar: Validation and results

Using a two-dimensional linear least-squares method applied to Doppler radar data, we test the viability of determining F-factor remotely. The ultimate application of such an algorithm will be supplying real-time F-factor maps, derived from ground-based Doppler radars to air traffic control personnel and pilots. Data from NASA deployments to the MIT/Lincoln Lab TDWR testbed radar in Orlando in 1991 and 1992 along with NASA deployments to the NCAR TDWR testbed radar in Denver are examined. Preliminary analyses show that the two-dimensional method correlates reasonably well with in situ measurements. Several effects, independent of the method used, act to reduce the correlation to less than one. These include time differences between radar and aircraft data, vertical misalignment between the aircraft and the radar beam, different spatial resolution scales between aircraft and radar data, inhomogeneous radar beam filling, noise in radar data that eludes filtering, and phase lag between time and space due to low pass filtering of the aircraft data. In the final assessment, it appears that a shear-based F-factor algorithm is preferable to the currently implemented TDWR algorithms which lack any local shear estimates

Quantifying the Effect of Pyraclostrobin on Grainfill Period and Kernel Dry Matter Accumulation in Maize

Strobilurin fungicides are effective against a wide range of foliar fungal diseases on several crops and may offer additional physiological benefits, including plants staying green longer than normal (the stay-green effect ). It has been hypothesized that the stay-green effect may extend the grain fill period leading to increased grain yield due to a longer period of dry matter accumulation. We investigated the effect of pyraclostrobin fungicide applied at tasseling on foliar disease suppression, stalk rot severity, the stay-green effect of leaves in the upper canopy, dry matter accumulation, time at physiological maturity, grain yield, and moisture at harvest in maize from 2008 through 2010 in Iowa at six location years. Foliar disease severity was0.1) between pyraclostrobin-treated and non-treated maize in all location years, treated plots tended to have higher yield and grain moisture. Time at physiological maturity did not differ between pyraclostrobin-treated and nontreated plots (P \u3e 0.1). Although we demonstrated an application of pyraclostrobin to maize delayed senescence of the leaves thus contributing to the stay-green effect, our data did not show grain-fill period extension

Soybean Chlorosis Studies on High pH Bottomland Soils

Soybean varieties are different in tolerance to lime-induced chlorosis. Field trials were conducted to evaluate variety performance on soils where chlorosis in soybeans was a known problem. Thirty-six varieties out of 177 were identified as tolerant to soil conditions that cause chlorosis. Eleven varieties of these 36 were found to have the most consistent yield performance on high pH soils. Tolerant varieties must be planted at adequate densities for best performance. A seeding rate of 13.5 seeds per foot of row, the highest seeding rate employed, did not appear to maximize yield on soils where chlorosis was severe. On some soils, chlorosis is so severe that even tolerant varieties planted at adequate densities will not produce seed. Under conditions where soils cause moderate to severe chlorosis in tolerant varieties, yields were improved by the use of a high pH stable chelate (Fe-EDDHA) with the seed

Soybean Chlorosis Studies on High pH Bottomland Soils

Soybean varieties are different in tolerance to lime-induced chlorosis. Field trials were conducted to evaluate variety performance on soils where chlorosis in soybeans was a known problem. Thirty-six varieties out of 177 were identified as tolerant to soil conditions that cause chlorosis. Eleven varieties of these 36 were found to have the most consistent yield performance on high pH soils. Tolerant varieties must be planted at adequate densities for best performance. A seeding rate of 13.5 seeds per foot of row, the highest seeding rate employed, did not appear to maximize yield on soils where chlorosis was severe. On some soils, chlorosis is so severe that even tolerant varieties planted at adequate densities will not produce seed. Under conditions where soils cause moderate to severe chlorosis in tolerant varieties, yields were improved by the use of a high pH stable chelate (Fe-EDDHA) with the seed

Mammography Facility Characteristics Associated With Interpretive Accuracy of Screening Mammography

BackgroundAlthough interpretive performance varies substantially among radiologists, such variation has not been examined among mammography facilities. Understanding sources of facility variation could become a foundation for improving interpretive performance.MethodsIn this cross-sectional study conducted between 1996 and 2002, we surveyed 53 facilities to evaluate associations between facility structure, interpretive process characteristics, and interpretive performance of screening mammography (ie, sensitivity, specificity, positive predictive value [PPV1], and the likelihood of cancer among women who were referred for biopsy [PPV2]). Measures of interpretive performance were ascertained prospectively from mammography interpretations and cancer data collected by the Breast Cancer Surveillance Consortium. Logistic regression and receiver operating characteristic (ROC) curve analyses estimated the association between facility characteristics and mammography interpretive performance or accuracy (area under the ROC curve [AUC]). All P values were two-sided.ResultsOf the 53 eligible facilities, data on 44 could be analyzed. These 44 facilities accounted for 484 463 screening mammograms performed on 237 669 women, of whom 2686 were diagnosed with breast cancer during follow-up. Among the 44 facilities, mean sensitivity was 79.6% (95% confidence interval [CI] = 74.3% to 84.9%), mean specificity was 90.2% (95% CI = 88.3% to 92.0%), mean PPV1 was 4.1% (95% CI = 3.5% to 4.7%), and mean PPV2 was 38.8% (95% CI = 32.6% to 45.0%). The facilities varied statistically significantly in specificity (P < .001), PPV1 (P < .001), and PPV2 (P = .002) but not in sensitivity (P = .99). AUC was higher among facilities that offered screening mammograms alone vs those that offered screening and diagnostic mammograms (0.943 vs 0.911, P = .006), had a breast imaging specialist interpreting mammograms vs not (0.932 vs 0.905, P = .004), did not perform double reading vs independent double reading vs consensus double reading (0.925 vs 0.915 vs 0.887, P = .034), or conducted audit reviews two or more times per year vs annually vs at an unknown frequency (0.929 vs 0.904 vs 0.900, P = .018).ConclusionMammography interpretive performance varies statistically significantly by facility

Al-26 production profile and model comparisons in Canyon Diablo

The large preatmospheric size of the Canyon Diablo meteorite, a radius of about 15 m, makes it especially suitable for systematic studies of cosmogenic nuclide production rates of iron objects in a 2 pi geometry. To reconstruct the exposure history of the meteoroid, Heymann et al. investigated several fragments recovered from known geographic locations around the crater for their shock features and cosmogenic nobel gases. They applied the Signer-Nier noble gas production rate model to establish the preatmospheric depth of the specimens in the meteoroid. Cosmic ray exposure ages suggested a multi-episodic irradiation, with 170 or 540 Ma being inferred for most of the samples studied while two anomalous specimens indicated a possible third exposure age at 940 Ma. Be-10 and Cl-36 have been measured in a number of these same samples by accelerator mass spectrometry (AMS), with use being made of the preatmospheric depths determined in Heymann et al. to construct production profiles. The present study extends the cosmogenic radionuclide data to Al-26 and compares the results with both the production rate model of Reedy and Arnold and production rates determined from the cross sections used by the Reedy-Arnold model (for the major nuclear reactions making Al-26) in combination with differential fluxes calculated using the Los Alamos High Energy Transport (LAHET) Code System. Model calculations for Be-10 and Cl-36 have also been obtained

Corn Quality Issues in 2008 – Field Molds

Fall weather has allowed late planted corn to mature, increasing grain yields expectations - the USDA October yield estimate is 172 bushels per acre in Iowa. Although high grain yields are expected, reports of quality issues are surfacing. The cool wet fall conditions also favor the development of fusarium fungi; the white or pink ear rots that are often found in ear corn stored too wet. Field moistures in the low 20s over a long period are favorable for these fungi, which in turn can produce several toxins harmful to people and livestock – vomitoxin, zearalenone, and fumonisin. Grain with field mold should be tested for mycotoxins before feeding